Attwood Power Guard 27 Battery Box

67 reviews - By: Attwood

Attwood Power Guard 27 Battery Box
MSRP : $13.89

Sale : $7.2
Sold & shipped by Walmart
"This Attwood Power Guard 27 Battery Box is for use with the battery series 27/27F/27M. Made with a polypropylene construction, this Attwood Battery Box has total acid resistance, allowing it to last. Featuring hold-down straps, instructions and mounting hardware, this marine battery box is easy to install. This Attwood Power Guard 27 Battery Box also has four cable openings, enlarged to .55"" diameter, and a molded inside cover."
  • Polypropylene construction
  • For battery series 27/27F/27M
  • 4 cable openings, enlarged to .55-inch diameter
  • Larger handles with rolled edges
  • Molded inside cover
  • Attwood battery box includes instructions and mounting hardware
  • Meets ABYC and US Coast Guard standards
  • Acid-resistant
  • Hold-down straps secure up to 350 lbs
  • Withstands hot and cold temperatures

EberhardFaberJr

It Rocks

A good battery box at a good price. Well-molded, tough material. Keeps battery and connectors relatively clean and protected from physical damage, rain, and UV rays. I use four inside camper storage bins to keep items on top from shorting across the battery terminals or moving the cables. The tiny top vents are present to avoid any concentration of flooded battery explosive gas under the cover. Concerns that rain might cause the battery to "short out" are peculiar, since 12V batteries and the wiring that attaches work just as well with no cover at all. Also, it would take a garden hose and a ton of patience to "fill the box with water" through these top vents. If that's a concern, it takes seconds to add a drain hole at box bottom. It's included retainer system works well for general usage. A good pick.

Abby2010

Cannot be beat

A tough and sturdy box with great handles and a strap

BobO

Perfect for most needs!

My only complaint of this really good, well-designed product is that the outside measurements were not identified as to which was the width and which was the height; I had to stop construction of my battery box mount because of that lacking info.

KyoVision7

Secure Battery

This box maybe good to protect your battery. There were a few difficulties during the installation. First, the spot has to be flat to set the box stable. Second, it includes instruction how to secure the box to the bottom of the boat. Strangely, necessary hardware mentioned in the instruction was not included. So, I used my own hardware to secure onto the hand-made base. You may have to be a handyman to install this box.

cabin1

Good box with a lot of potential

I purchased this battery box to keep my trolling motor battery self contained in my jon boat. I also purchased the 50 amp circuit breaker and installed on top of the box as added protection for my Minn Kota 55lb thrust motor. Worked out great at a fraction of the cost of the other boxes.